Top 10 tips to Look for Water Damage and Mold in Buildings

5/30/2017 (Permalink)

Mold is ubiquitous, mold spores are floating around in the air everywhere, all the time.
The total number of spores and specific species can vary wildly. While a small amount of mold is growing in all of our homes, especially in kitchens and bathrooms, this growth rarely triggers symptoms for normal occupants. Significant mold growth due to water damage is of the greatest concern. Hidden water damage can promote significant mold growth that can seriously affect occupant health.

The best way, by far, would to have any new home you are considering moving into inspected and tested by a Certified Microbial Investigator. A standard residential Mold/IAQ Inspection with air and/or surface sampling will typically identify if any significant mold growth is active in a home.

However, the cost of an inspection can be impractical if you are looking at multiple places to move to. Below are 10 tips you can use to identify water damage and mold in buildings prior to purchase or signing a long-term lease. Use these tips to narrow your search and then invest in a professional inspection when you have found the “one”.

Mold in Buildings
No Downspout
10) Drainage: At minimum this usually means gutters and downspouts.

Do the downspouts tie into a site drainage system?
Are the gutters clogged with leaves and other debris?
Walk around the property, is it on a hill?
Will water flow toward the building when it rains?
Are there drainage culverts, channels, and storm drains?
Are these drains clear or clogged with debris?
Is there evidence of water splashing onto the building siding?
Proper drainage is key to preventing excess moisture entering a building, a basement, or crawlspace and leading to dry rot or mold growth.

9) Building Envelope – Roof, Windows, Doors, siding, Foundation – Leaks from Exterior

Mold in Buildings
Peeling Paint on Siding
Look at the roof, is it in good condition?

Are the roof penetrations well sealed or is the sealer old and cracking?

Check the ceiling inside for signs of roof leaks, water staining, bubbling, etc.

Look carefully around siding, window and door frames?

Is the caulking cracked or smooth and in good condition?
Are the frames cracking?
Is the paint peeling?
Are there cracks or other gaps (where a chimney meets the wall may be one) that may allow water to enter the building envelope?
All are signs that water may be able to enter the building envelope.

8) Leaks – Interior – Plumbing – Fresh water and Drain Plumbing

Water and moisture don’t only come from the outside. The internal plumbing system can leak and provide moisture for mold growth.

Check under all sinks, kitchen, bathrooms, laundry room for visible leaks and musty smells.
Look around tubs and showers for signs of leaks, mold growth, and bubbling. Tiles that are coming loose are often a sign of moisture in the wall behind.
Look at drains for signs of leaks.

7) Condition

Mold in Buildings
Clogged Drain
What is the overall condition of the space? Run down or pristine? Likely somewhere in between, but the general condition can give you a clue how well long term maintenance has been. Shoddy maintenance can allow water damage to fester and mold growth to set in.

6) Condensation

Single pane windows are notorious for excessive condensation.

Are window sills cracked and stained?
Are window sills dirty or show visible mold growth?
Check the back of blinds and drapes for signs of condensation and mold growth.
Older homes, prior to the 1970’s, are usually not insulated. Large pieces of furniture placed against cold, outside walls can be place for condensation and mold growth.

Check behind large dressers, bookshelves, or headboards for condensation and mold.
Closets that share an outside wall can be very problematic. The excess condensation, limited airflow in a closed closet, as well as plenty of organic material for mold to eat (cotton and wool clothes, cardboard boxes, etc) can lead to a significant mold infestation.

5) Ventilation

Bathroom without sufficient ventilation can be very problematic for condensation. If there is water staining and mold growth or mold stains on the ceiling or walls (some growth in the shower and bath is normal, but not outside of those areas) it is likely condensation may be a problem.

Does the bathroom have a good exhaust fan?
Is the fan register clean or clogged with dust and debris?
Does the bath fan have a timer?
Many older buildings only have windows for bathroom ventilation adding a fan to the window or the bathroom may be necessary to counteract excessive condensation. Kitchens also should have exhaust fans for the range stove that can exhaust excess moisture from cooking to the exterior. Some older buildings only have recirculating fans or no fans at all.

4) HVAC System

The HVAC (Heating, Ventilation and Air Conditioning) system is very important to maintaining both occupant comfort and good air quality. Often the HVAC system is the only way to filter the air we breath inside our homes, although not all HVAC systems have filters! Also, dust and moisture and pests (insects and rodents) can hide out in our ducts and other areas of the HVAC system.

If the system has a filter, check it! Is it dirty or clean?
Change the filter regularly and use the best quality filter the system can handle.
Check the ducts and registers with a flashlight. Are they dirty or clean? Any signs of insect or rodent infestation. Take a sniff, there should be no foul or musty odors.
Lift floor registers and look inside for dust and debris.
Some systems don’t have ducts, such as radiant floor heat or wall or space heaters.
Check wall heaters for buildup of dust and debris. The insides should be clean.
A portable air HEPA filter may be advised if the building has radiant heating.

3) Housekeeping

Mold in Buildings
Visible Mold Growth on Baseboard and Wall
Does the building seem “clean”? Remember to check the hard to reach places.

Check the tops of door and window frames for dust buildup.
Check under the refrigerator. This area can build up quite a bit of debris and mold can grow on the condenser coils.
Check behind large items such as cabinets and couches.
Mold can easily grow on “Biofilms”. Household dust is considered a biofilm, as it is composed of organic material (skin cells, insect part, cotton and cellulose fibers, pet dander) that mold can use as a food source.
Does the building have carpet? Does the carpet appear clean? Is the carpet stained? Carpet can hold moisture from cleaning and spills as well as pet urination, in additional to other contaminants carpet tends to accumulate settled mold spores that come in the air from the exterior. Carpet can hold mold spores that can become active under conditions of high humidity.

2) Musty Smell

Probably the second biggest “Red Flag” for building you may occupy. A musty smell = ACTIVE MOLD GROWTH. Trust your nose and if there is a moderate to strong musty smell, RUN AWAY.

1) VISIBLE MOLD

Mold in buildings should not be visible, with the exception of small amounts around sinks, baths and showers. Sometimes a minor amount around window sills is acceptable. But if you see visible mold growth on walls, ceilings, baseboards, under sinks, etc. this is sign of a significant mold infestation.

I hope you can use the above top 10 tips to help find healthy and happy place to call home!

In the event you are looking at a home and are unsure of mold growth you can call SERVPRO of Woodridge/Bolingbrook to come out and do some testing.  If after testing there seems to be a significant number of mold spores present we can do the remediation as well.

Call us at 630-771-1720